Presses
 The Laboratory Benchtop Press is an electrically heated sealed hydraulic press. The precision ground nickel plated carbon steel platens (stainless steel optional) make this piece of equipment extremely durable. The Benchtop Press utilizes 3-term PID digital temperature control and heats up to 300°C (higher temperature options are available). The platen guides are linear bearing units on hardened, precision ground steel shafts. Tooling can be designed and supplied to meet customer specifications.
Features:
- Electrically heated
- Sealed hydraulic press
- Extremely durable
- Small footprint
Benchtop Press
The laboratory benchtop is an electrically heated sealed 10 tonne hydraulic press with carbon steel or optional stainless steel platens. Platen width and depth is 150mm and the daylight is 90mm.
Using 3-term PID digital temperature control platens can be accurately controlled to up to 300°C.
The platen guides are linear ball bearing units on hardened, precision ground steel shafts.
Tooling is designed and supplied to meet customer specifications.
Automatic Presses
 A full range of automatic presses are available with forces of up to 25 tonnes.
Safety pressure relief valves are fitted to all presses and moving components guarded and fitted with electrical interlocks.
| Hydraulic Laboratory Benchtop Press Construction * |
| Platens |
Ground Nickel-plated carbon steel platens (stainless optional). |
| Heating |
Heats up to 300°C with 3-term PID control on each platen. |
| Platen Guides |
Linear bearing units on hardened and ground precision steel shafts. |
| Safety |
Safety pressure relief valve. Moving components are fully guarded. Includes electrical interlock to prevent operation when guard is open. |
| Controls |
Control panel integrates heating on/off and temperature control. |
| Temperature Control |
Electric Cartridge Heaters (0 to 300°C) with fuzzy logic PID control. Type J thermocouples with solid state switching. |
|
|
*
|
Specifications and construction details are provided by Rondol Technology Limited and are subject to change without notice.
|
Specification:
| Machine Specification * |
Imperial |
Metric |
| Platen Width |
5.9 in |
150 mm |
| Platen Depth |
5.9 in |
150 mm |
|
Maximum Daylight (increased daylight options available)
|
3.5 in |
90 mm |
| Clamping Force |
10 Tonnes |
| Voltage Requirements |
230V - Single Phase - 50 Hz or 120V - Single Phase - 60 Hz
|
|
|
*
|
Specifications and construction details are provided by Rondol Technology Limited and are subject to change without notice.
|
|
